GJB 3935A-2018《舰船用防弹钢板规范》适用于公称厚度 4 mm~20 mm 的舰船用防弹钢板。标准内的 22Si2Mn2(钢号 FE-1G)与 21Si2Mn2(钢号 FE-1Z)属硅锰系低合金调质钢,经淬火加回火后获得回火马氏体组织,以布氏硬度、断口、超声检测与抗弹试验作为主要考核内容,用于舰艇舱室、舷侧内衬等部位的抗破片与抗枪弹防护。
以 C、Si、Mn 为主要合金元素,配合电炉冶炼与炉外精炼控制夹杂物和带状偏析;淬火后经低温或中温回火,在硬度与韧性之间取得平衡。
该类钢板以交货态布氏硬度作为主要力学性能指标,并配合断口检验、超声检测与靶试抗弹考核;硬度高低与抗弹能力、成形与焊接工艺性直接相关。
以热轧钢板为基板,经淬火、回火后以热处理状态交货;厚度分档对应不同防护等级与结构部位,可按图切割、折弯后装配。
按“标准—牌号—性能—用途—制造—企业”的顺序组织,便于选材、设计与采购人员分别取用。
确定防护对象:破片、普通枪弹或穿甲燃烧弹,以及射距、着角与允许背凸量。
按公开靶试资料与设计冗余确定 4–20 mm 内的板厚,并核算重量与安装空间。
高硬度抗弹部位倾向 FE-1G;需兼顾韧性、折弯与焊接时考虑 FE-1Z。
在合同中约定硬度抽检、超声级别、断口与靶试要求,并核对正式标准文本。
GJB 3935A-2018 covers hot-rolled, quenched and tempered bullet-proof steel plates for naval applications in nominal thicknesses from 4 mm to 20 mm. Two grades are specified: 22Si2Mn2 (FE-1G) for high-hardness direct protection, and 21Si2Mn2 (FE-1Z) for improved toughness where bending or welding is required. Both are silicon-manganese low-alloy steels with a tempered martensitic structure, delivered in the heat-treated condition and assessed mainly by Brinell hardness, fracture appearance, ultrasonic inspection and ballistic testing.
Published data indicate hardness ranges of 415–514 HBW for FE-1G and 321–388 HBW for FE-1Z, obtained by quenching at 920–960 °C and tempering at about 220 °C or 450 °C respectively. Typical products include cabin protective liners, side-shell liners, armoured doors and window frames, ballistic shelters, equipment shields and test targets. The plates are intended as replaceable local protection rather than primary hull structure; forming, welding and corrosion protection therefore require qualified procedures. English product names are listed on the Applications page, and ordering details on the Contact page.
以上英文段落为中文内容的要点译述,便于海外客户快速了解牌号、性能与用途;数据口径与本站中文页面一致,验收仍以标准正式文本与合同为准。
本站以 GJB 3935A-2018《舰船用防弹钢板规范》为主线,牌号、热处理与硬度数据来自公开标准资料与行业公开技术文章;涉及验收、仲裁与合格判定的内容,以正式出版的标准文本和合同约定为准。
军用标准全文不在本站转载。文中标注“参考”的靶试对应关系、硬度换算与碳当量为工程估算,不构成质量承诺;订货前请核对现行有效版本与钢厂质保书。