耐候钢技术资料汇编 Atmospheric Corrosion Resistant Steel — Technical Compilation
- 1 概述 / Overview1.1 定义与原理 / Definition and Principle耐候钢,全称耐大气腐蚀钢(Atmosp…
- 其保护效果与环境条件、结构部位及表面状态有关,在通风良好、干湿交替的大气条件下表现较好。
- Weathering steel, also called atmospheric corrosion resistant steel, i…
- 涉及:行业资讯、正火
1 概述 / Overview
1.1 定义与原理 / Definition and Principle
耐候钢,全称耐大气腐蚀钢(Atmospheric Corrosion Resistant Steel),是通过添加 Cu、P、Cr、Ni 等少量合金元素,使钢材在户外大气环境中于表面形成一层致密、稳定的保护性锈层,从而减缓后续腐蚀速率的低合金钢。其保护效果与环境条件、结构部位及表面状态有关,在通风良好、干湿交替的大气条件下表现较好。
Weathering steel, also called atmospheric corrosion resistant steel, is a low-alloy steel to which small amounts of Cu, P, Cr and Ni are added so that a dense, stable protective rust layer forms on the surface in outdoor atmospheric conditions, slowing the subsequent corrosion rate.
1.2 适用范围 / Application Scope
GB/T 4171-2008 适用于车辆、桥梁、集装箱、建筑、塔架和其他结构用具有耐大气腐蚀性能的热轧和冷轧钢板、钢带和型钢;耐候钢可制作螺栓连接、铆接和焊接的结构件。TB/T 1979-2023 适用于机车车辆用耐大气腐蚀钢板、钢带及相应制件。
The data in this compilation are organized for selection and technical communication. The complete grade list, limit values and acceptance rules shall be taken from the official standard texts, the purchase contract and the mill certificate.
2 参考标准 / Reference Standards
2.1 GB/T 4171-2008《耐候结构钢》
该标准代替 GB/T 4171-2000、GB/T 4172-2000 和 GB/T 18982-2003,规定了耐候结构钢的尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书。标准将牌号分为高耐候钢(代号 GNH)和焊接耐候钢(代号 NH)。
2.2 TB/T 1979-2023《机车车辆特种金属材料 耐大气腐蚀钢》
该标准于 2023-09-14 发布、2024-04-01 实施,代替 TB/T 1979-2014 与 TB/T 2375-1993。标准按特性分为 NQ(耐大气腐蚀)、EW(高耐蚀)、AW(耐酸)三类;交货状态代号 R(热轧)、L(冷轧)、N(M)(正火或正火轧制)。